The Biomechanical Effects of Intramedullary Fixation to the Level of the Physeal Scar on Distal Tibia Fracture Stability.

INTRODUCTION

The purpose of this study was to evaluate whether intramedullary nail contact with physeal scar improves construct mechanics when treating distal tibial shaft fractures.

METHODS

Axially unstable extra-articular distal tibia fractures were created in 30 fresh frozen cadaveric specimens (15 pairs, mean age 79 years). Specimens underwent intramedullary nailing to the level of the physeal scar locked with one or two interlocks or short of the physeal scar locked with two interlocks (reference group). Specimens were subjected to 800N of axial load for 25,000 cycles. Primary outcomes were stiffness before and after cyclic loading. Secondary outcomes were load to failure, load at 3 mm displacement, plastic deformation, and total deformation.

RESULTS

The physeal scar with one interlock cohort demonstrated 3.8% greater stiffness before cycling ( P = 0.75) and 1.7% greater stiffness after cycling ( P = 0.86) compared with the reference group. The physeal scar with two interlocks group exhibited 0.3% greater stiffness before cycling ( P = 0.98) and 8.4% greater stiffness after cycling ( P = 0.41) in relation to the reference group. No differences were identified regarding load to failure or load at 3 mm displacement. In specimens with two interlocks, those in contact with the physeal scar demonstrated significantly less plastic ( P = 0.02) and total ( P = 0.04) deformation.

CONCLUSIONS

Constructs ending at the physeal scar demonstrated stiffness and load to failure similar to those without physeal scar contact. Less plastic and total deformation was noted in two-interlock constructs with physeal scar contact, suggesting a possible protective effect provided by the physeal scar. These data argue that physeal scar contact may offer a small mechanical benefit in nailing distal tibia fractures, but clinical relevance remains unknown.