Quantification of Cervical Elasticity During Pregnancy Based on Transvaginal Ultrasound Imaging and Stress Measurement.

UNLABELLED: Strain elastography and shear wave elastography are commonly used to quantify cervical elasticity. However, the absence of stress information in strain elastography causes difficulty in inter-session elasticity comparison, and the robustness of shear wave elastography is compromised by cervical tissue's high inhomogeneity.

OBJECTIVE

To overcome these limitations, we develop a quantitative cervical elastography system by adding a stress sensor to a clinically used transvaginal ultrasound imaging system.

METHODS

We record the cervical deformation in B-mode images and measure the probe-surface stress through the sensor. Then we quantify the strain using a customized algorithm and estimate the cervical Young's modulus through stress-strain linear regression.

RESULTS

In phantom experiments, we demonstrate the system's high accuracy (alignment with the quasi-static compression method, p-value = 0.369 > 0.05), robustness (alignment between 60°- and 90°-contact measurements, p-value = 0.638 > 0.05), repeatability (consistency of single sonographers' measurements, coefficient of variation < 0.06), and reproducibility (alignment between two sonographers' measurements, Pearson correlation coefficient = 0.981). Applying it to pregnant participants, we observe significant cervical softening (p-value < 0.001): Young's modulus decreases 3.95% weekly and its geometric mean value during the first (11 to 13 weeks), second, and third trimesters are 13.07 kPa, 7.59 kPa, and 4.40 kPa, respectively.

CONCLUSION

The proposed system is accurate, robust, and safe, and enables longitudinal and inter-examiner comparisons.

SIGNIFICANCE: The system applies to different ultrasound machines with minor software updates, which allows for studies of cervical softening patterns in pregnancy for larger populations, facilitating insights into conditions such as preterm birth.