Neph-ex: a 3D printed interventional radiology training tool for nephrostomy exchange.

OBJECTIVES

Fluoroscopic guided procedures are a mainstay for interventional radiology (IR) procedures. Practice is needed for the novice to interpret fluoroscopic images and simultaneously perform the procedure hands-on as well as control the foot pedal to screen. We describe the development of a training simulation model which simulates the human kidney, ureter, and bladder.

METHODS

Stereolithography (SLA) 3D print technology using SLA resin and Anycubic SLA printer were employed. A plastic tubing was used to connect the 3D printed kidney and bladder as the ureter. This simulation model permits fluoroscopic guided filling of "pelvicalyceal system" with contrast as well as ureteric stenting, guidewire, and drainage catheter manipulation. Effectiveness of the model to attain skills for nephrostomy exchange and ureteric stenting was obtained via questionnaire from trainees prior to and after utilizing the model.

RESULTS

The 3D printing simulation model of the kidney, ureter, and bladder system enables trainees to perform nephrostomy exchange, nephrostogram, and antegrade stenting. Participants felt more confident to perform the procedures as they were more familiar with the procedure. Besides that, participants felt their wire and catheter manipulation skills have improved after using the simulation model.

CONCLUSIONS

Neph-ex simulation model is safe and effective for hands-on training in improving proficiency of fluoroscopy-guided nephrostomy exchange and antegrade ureteric stenting.

ADVANCES IN KNOWLEDGE: As of our knowledge, there are no commercially available simulation models for fluoroscopic guided nephrostomy exchange and ureteric stent deployment. No article on nephrostomy exchange simulation model has been published before.