MedElevator Войти в исследования
← Поиск публикаций

DOI 10.12122/j.issn.1673-4254.2025.05.24

Медицинская библиотека · Nan fang yi ke da xue xue bao = Journal of Southern Medical University · 2025

[Biomechanical analysis of a novel bridging plate for treating Rockwood III acromioclavicular joint dislocation].

Chen Yancai, Zhang Gaofeng, Li Shubo, Luo Nianxiang, Zhang Yi

Аннотация на английскомСтатьяПеревод в очереди

Аннотация

OBJECTIVES

To assess the biomechanical performance of a novel bridging plate for treating Rockwood III acromioclavicular joint dislocation.

METHODS

A novel bridging plate structure was designed based on CT data from a patient with Rockwood type III acromioclavicular joint dislocation, and a finite element model of the bridging plate-acromioclavicular joint interaction was constructed. The stress and deformation characteristics and biomechanical compatibility of the plate under post-reduction, normal loading, and impact loading conditions were analyzed to evaluate its fixation mechanism and clinical advantages.

RESULTS

The stiffness of the bridging system was 27.78 N/mm, close to that of acromioclavicular joint ligaments (26.05 N/mm) and meeting the requirements for flexible deformation. Under normal loading, the maximum stress in the bridging system was 88.29 MPa to sustain physiological activities; under impact loading, the maximum stress reached 480 MPa, and the cable underwent plastic deformation to dissipate energy and effectively buffer local stress concentrations, thereby reducing the risk of rigid bone fractures. The high-stress regions in the bone primarily occurred at the edges of the C1-C4 screw holes. The maximum bone stress was 0.762 MPa under normal loading and 5.963 MPa under impact loading, accounting for 2.86% and 1.66% of the corresponding bolt stresses, respectively.

CONCLUSIONS

The novel bridging plate is better adapted to biomechanical characteristics of the acromioclavicular joint compared to traditional internal fixation. This fixation system provides sufficient stability while allowing physiological micromotion to facilitate postoperative rehabilitation. Significant flexible deformation can occur at the connection between the fixation ring and the cable, and brittle materials should not be used in this region. The issue of stress concentration at the C1-C4 screw holes requires special attention in its clinical application.

Для цитирования: Chen Yancai, Zhang Gaofeng, Li Shubo, Luo Nianxiang, Zhang Yi. [Biomechanical analysis of a novel bridging plate for treating Rockwood III acromioclavicular joint dislocation].. Nan fang yi ke da xue xue bao = Journal of Southern Medical University. 2025. DOI: 10.12122/j.issn.1673-4254.2025.05.24.

Предметные рубрики MeSH

Подготовка и перевод публикации
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…

История · было → стало

Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.

Тип публикации указан по данным источника. Уровень доказательности автоматически не присваивается.