DOI 10.1016/j.bjps.2020.10.017
Modeling and measuring average nasal asymmetry by dorsum midline and nose tip lateral deviation.
Аннотация
In rhinoplasty and nasal reconstruction, achieving symmetry is critical for optimal patient outcomes and reducing re-operation rates. Assessing nasal asymmetry is challenging, both pre- and intra-operatively, if based on only a surgeons' visual perception to assess and adjust the small distances important to cosmesis (<2-3 mm). To measure nasal symmetry, we first developed an algorithm to analyze lateral nasal deviation on facial three-dimensional (3D) scans captured by external surface scanning. In this, nasal deviation is measured by first registering a 3D facial scan to orthogonal axes in order to remove tilt. The lateral position of the nasal midline is then found across transverse planes along the dorsum and nasal tip regions by probing midpoints 1 and 2 mm back from the local maximum projection. The nasal deviation measurement algorithm was validated on a simulated asymmetrical nose model with known nasal deviation. Simulated deviations were applied to the symmetrical average nose using an exponential twist away from the face, with control of the maximum deviation and degree of curvature. Modeled deviations were evaluated with the algorithm at clinically negligible (0.02-0.06 mm) average differences and for small lateral deviations (1-5 mm). Nasal deviation using the algorithms was then measured for the 100 multi-ethnic subjects in the Binghamton University 3D Facial Expression database. Average values for maximum lateral deviation, deviation across the whole nose, and deviation at the nose tip were measured to provide context to deviation measurements in surgical planning. This research presents a new nasal assessment tool that can be useful in improving symmetry in rhinoplasty and reconstruction.
Предметные рубрики MeSH
Подготовка и перевод публикации
Обработка статьи · этапы, ошибки и управление
Ошибки и ограничения
История · было → стало
Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.
Тип публикации указан по данным источника. Уровень доказательности автоматически не присваивается.