MedElevator Войти в исследования
← Поиск публикаций

DOI 10.4317/jced.64108

Медицинская библиотека · Journal of clinical and experimental dentistry · 2026

The effect of thickness and sintering mode on the impact strength of a graded Zirconia.

da Cruz Beatriz Serralheiro, de Oliveira Dal Piva Amanda M, Mendes Tribst João Paulo, Lena Isabella Marian, Werner Arie, de Melo Renata Marques, Kleverlaan Cornelis Johannes

СтатьяОбзорПеревод в очереди

Аннотация

BACKGROUND

Graded zirconia ceramics balance the high strength of 3Y-TZP with the translucency of 5Y-PSZ through their layered microstructure. However, the mechanical behavior of distinct compositional zones, particularly the transition zone, remains insufficiently characterized under dynamic loading conditions. This study aimed to evaluate the influence of different sintering protocols and thicknesses on the impact strength of graded zirconia.

MATERIAL AND

METHODS

Specimens were sectioned by layer (3Y-TZP, transition zone, 5Y-PSZ) under two thicknesses (1.0 and 1.5 mm) and two sintering protocols (conventional and speed). Impact strength testing, finite element analysis, and fractographic analysis were performed. A total of 180 bars were tested using the Dynstat method, with results analyzed via three-way ANOVA ( = 0.05).

RESULTS

The 3Y-TZP layer exhibited the highest impact strength (46.8-66.7 kJ/m²), followed by the transition zone (23.7-41.9 kJ/m²) and 5Y-PSZ (15.5-28.7 kJ/m²). A significant three-way interaction (F2,168 = 5.080, p = 0.007) was observed, with thicker 5Y-PSZ specimens showing ~45% less resistance under speed sintering. Fractographic analysis revealed intergranular fracture without delamination, confirming structural integrity.

CONCLUSIONS

The 3Y-TZP layer provides superior impact resistance regardless of processing conditions, while conventional sintering is preferable for thicker 5Y-PSZ layers. These findings inform material selection and manufacturing processes for graded zirconia restorations in high-stress applications.

Для цитирования: da Cruz Beatriz Serralheiro, de Oliveira Dal Piva Amanda M, Mendes Tribst João Paulo, Lena Isabella Marian, Werner Arie, de Melo Renata Marques, Kleverlaan Cornelis Johannes. The effect of thickness and sintering mode on the impact strength of a graded Zirconia.. Journal of clinical and experimental dentistry. 2026. DOI: 10.4317/jced.64108.
Подготовка и перевод публикации
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…

История · было → стало

Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.

Тип публикации указан по данным источника. Уровень доказательности автоматически не присваивается.