The influence of geometry on intervertebral disc stiffness.

Geometry plays an important role in intervertebral disc (IVD) mechanics. Previous computational studies have found a link between IVD geometry and stiffness. However, few experimental studies have investigated this link, possibly due to difficulties in non-destructively quantifying internal geometric features. Recent advances in ultra-high resolution MRI provides the opportunity to visualise IVD features in unprecedented detail. This study aimed to quantify 3D human IVD geometries using 9.4 T MRIs and to investigate correlations between geometric variations and IVD stiffness. Thirty human lumbar motion segments (fourteen non-degenerate and sixteen degenerate) were scanned using a 9.4 T MRI and geometric parameters were measured. A 1kN compressive load was applied to each motion segment and stiffness was calculated. Degeneration caused a reduction (p < 0.05) in IVD height, a decreased nucleus-annulus area ratio, and a 1.6 ± 3.0 mm inward collapse of the inner annulus. The IVD height, anteroposterior (AP) width, lateral width, cross-sectional area, nucleus-annulus boundary curvature, and nucleus-annulus area ratio had a significant (p < 0.05) influence on IVD stiffness. Linear relationships (p < 0.05, r > 0.47) were observed between these geometric features and IVD compressive stiffness and a multivariate regression model was generated to enable stiffness to be predicted from features observable on clinical imaging (stiffness, N/mm = 6062 - (61.2 × AP width, mm) - (169.2 × IVD height, mm)). This study advances our understanding of disc structure-function relationships and how these change with degeneration, which can be used to both generate and validate more realistic computational models.