MedElevator Войти в исследования
← Поиск публикаций

DOI 10.1186/s41205-024-00208-z

Медицинская библиотека · 3D printing in medicine · 2024

Fabricating patient-specific 3D printed drill guides to treat femoral head avascular necrosis.

Bell Cameron, Feizi Alborz, Roytman Gregory R, Ramji Alim F, Tommasini Steven M, Wiznia Daniel H

СтатьяПеревод в очереди

Аннотация

BACKGROUND

Femoral head avascular necrosis (AVN), or death of femoral head tissue due to a lack of blood supply, is a leading cause of total hip replacement for non-geriatric patients. Core decompression (CD) is an effective treatment to re-establish blood flow for patients with AVN. Techniques aimed at improving its efficacy are an area of active research. We propose the use of 3D printed drill guides to accurately guide therapeutic devices for CD.

METHODS

Using femur sawbones, image processing software, and 3D modeling software, we created a custom-built device with pre-determined drill trajectories and tested the feasibility of the 3D printed drill guides for CD. A fellowship trained orthopedic surgeon used the drill guide to position an 8 ga, 230 mm long decompression device in the three synthetic femurs. CT scans were taken of the sawbones with the drill guide and decompression device. CT scans were processed in the 3D modeling software. Descriptive statistics measuring the angular and needle-tip deviation were compared to the original virtually planned model.

RESULTS

Compared to the original 3D model, the trials had a mean displacement of 1.440 ± 1.03 mm and a mean angle deviation of 1.093 ± 0.749º.

CONCLUSIONS

The drill guides were demonstrated to accurately guide the decompression device along its predetermined drill trajectory. Accuracy was assessed by comparing values to literature-reported values and considered AVN lesion size. This study demonstrates the potential use of 3D printing technology to improve the efficacy of CD techniques.

Для цитирования: Bell Cameron, Feizi Alborz, Roytman Gregory R, Ramji Alim F, Tommasini Steven M, Wiznia Daniel H. Fabricating patient-specific 3D printed drill guides to treat femoral head avascular necrosis.. 3D printing in medicine. 2024. DOI: 10.1186/s41205-024-00208-z.
Подготовка и перевод публикации
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…

История · было → стало

Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.

Тип публикации указан по данным источника. Уровень доказательности автоматически не присваивается.