Experience with the utilization of new-generation shared-control robotic system for spinal instrumentation.

BACKGROUND

Robotic assistance in spine surgery is emerging as an accurate, effective and enabling technology utilized in the treatment of patients with surgical spinal pathology. The safety and reproducibility of robotic assistance in the placement of pedicle screw instrumentation is still being investigated. The objective of this study was to present our experience of instrumented spinal fusion utilizing an intraoperative robotic guidance system.

METHODS

We retrospectively reviewed all cases of spinal instrumentation of the thoracic and lumbo-sacral spine using the Mazor X robotic system (Medtronic Inc, Minneapolis, MN, USA), performed at our institution by one surgeon between July 2017 and June 2020. Wilcoxon Rank test was used to compare time taken to place each screw during the first 20 cases and the cases thereafter.

RESULTS

A total of 28 patients were included. A total of 159 screws were placed using the Mazor X robotic system. The overall mean time for screw placement was 7.8±2.3 minutes and there was a significant reduction in the mean time for screw placement after the 20th case or 120 screws (8.70 vs. 5.42 min, P=0.008). No postoperative neurologic deficit or new radiculopathy was noted to occur secondary to hardware placement. No revision surgery was required for replacement or removal of a mispositioned screw.

CONCLUSIONS

From this single-center, single-surgeon series we conclude that robot-assisted spine surgery can be safely and efficiently integrated into the operating room workflow, which improves after a learning curve of approximately 20 operative interventions. We found robot-assisted spinal instrumentation to be reliable, safe, effective and highly precise.