DOI 10.1007/s43390-022-00528-2
S2 alar-iliac screw versus traditional iliac screw for spinopelvic fixation: a systematic review of comparative biomechanical studies.
Аннотация
PURPOSE: To review and compare biomechanical properties between S2 alar-iliac (S2AI) screws and traditional iliac screws for spinopelvic fixation.
METHODS
A systematic review was performed according to PRISMA guidelines. All clinical, cadaveric, and finite-element model (FEM) studies that compared the biomechanical properties between S2AI screws and traditional iliac screws were included. Study methodological quality for cadaveric studies were analyzed using the Quality Appraisal for Cadaveric Studies (QUACS) scale.
RESULTS
Eight studies (4 cadaveric, 4 FEM) analyzing 58 S2AI screws and 48 traditional iliac screws were included. According to QUACS, the overall methodological quality was "moderate to good" for all four cadaveric studies. All four cadaveric studies found no difference in biomechanical stiffness, screw toggle, rod strain, and/or load-to-failure between the S2AI screws and traditional iliac screws for spinopelvic fixation. All four FEM studies found that S2AI screws were associated with lower implant stresses compared to traditional iliac screws.
CONCLUSIONS
There is moderate biomechanical evidence to suggest that there is no significant difference in stability and stiffness between S2AI screws and traditional iliac screws for spinopelvic fixation. However, there is some evidence to support that the placement of S2AI screws may have lower implant stresses on the overall lumbosacral instrumentation compared to traditional iliac screws.
Предметные рубрики MeSH
Подготовка и перевод публикации
Обработка статьи · этапы, ошибки и управление
Ошибки и ограничения
История · было → стало
Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.
Тип публикации указан по данным источника. Уровень доказательности автоматически не присваивается.