MedElevator Войти в исследования
← Поиск публикаций

DOI 10.1177/1098612x20913352

Медицинская библиотека · Journal of feline medicine and surgery · 2020

Evaluation of different cleaning methods for feline inhalation chambers after bacterial contamination.

Klenk Friederike K, DeSimoi Vanessa, Wolf Georg, Schulz Bianka S

СтатьяПоддержка исследования: вне правительства СШАПеревод в очереди

Аннотация

OBJECTIVES

Inhalation chambers are commonly used for the delivery of aerosol drugs to cats with respiratory disease. The aim of the study was to identify successful cleaning methods for inhalation devices after standardised bacterial contamination.

METHODS

Spacer devices of two different manufacturers were used: RC Chamber (Cegla Medizintechnik) and Aerokat (Trudell Medical International). The bacterial contamination was performed using Pseudomonas aeruginosa. Previously marked areas of the chamber were contaminated with 50 μl of bacterial solution, containing between 2.2 ×105 and 2.1 ×108 colony-forming units/ml each. After cleaning the devices as recommended by each manufacturer (RC Chamber: special microwave cleaning bag [n = 5] or boiling water with liquid dish detergent for 15 mins [n = 5]; Aerokat: rinsing in a solution of lukewarm water and liquid dish detergent for 15 mins), chambers were air-dried for 24 h and samples for bacterial culture were taken from three defined areas. Sample material was applied on Müller-Hinton agar plates and subsequently incubated for 24 h at 37°C.

RESULTS

Bacterial contamination was not detected in any of the examined inhalation devices using the recommended cleaning methods.

CONCLUSIONS AND RELEVANCE: If inhalation chambers are cleaned following the manufacturers' recommendations, successful bacterial decontamination can be expected.

Для цитирования: Klenk Friederike K, DeSimoi Vanessa, Wolf Georg, Schulz Bianka S. Evaluation of different cleaning methods for feline inhalation chambers after bacterial contamination.. Journal of feline medicine and surgery. 2020. DOI: 10.1177/1098612x20913352.

Предметные рубрики MeSH

Подготовка и перевод публикации
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…

История · было → стало

Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.

Тип публикации указан по данным источника. Уровень доказательности автоматически не присваивается.