Journal of orthopaedics · 2024
Dynamic parallel traction theoretical model for the application and validation in femoral neck fractures - a finite element analysis.
СтатьяНазвание и аннотация: Перевод в очереди
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…
Ошибки и ограничения
История · было → стало
Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.
Li Jiarui, Xing Kunyue, Wang Wenzhuo, Sun Li, Xue Linyuan, Xing Jiyao, Wu Xiaolin, Xing Dongming
Аннотация
STUDY OBJECTIVE: This study aims to validate the application effects of a novel theoretical model of dynamic parallel traction in the treatment of femoral neck fractures through three-dimensional finite element analysis. By simulating the femoral neck fracture model, we explore the promotional effect of dynamic parallel traction on fracture healing.
METHOD: A digital 3D femur model was constructed using high-resolution computed tomography data of the lower limbs of a 70-year-old elderly subject. An axial compression of 500N was applied at different traction angles (0°, 10°, 20°, 30°, 40°, 50°). The equivalent stress distribution and deformation of the femur geometric model were calculated at each angle under the six α angles. Statistical analysis was performed using One-Way ANOVA.
RESULTS: At the parallel angle ( α = 0°), the maximum stress on the entire femur occurred at the trochanteric fossa, with a value of 7.945 MPa ( α = 0°). The maximum deformation was at the fovea capitis, with a value of 104.13 mm ( α = 0°). As the traction angle gradually increased ( α = 10°, α = 20°, α = 30°, α = 40°, α = 50°), the maximum stress shifted gradually to the medial cortex of the femoral shaft, with values of 11.236 MPa ( α = 10°), 15.196 MPa ( α = 20°), 19.263 MPa ( α = 30°), 23.149 MPa ( α = 40°), and 26.311 MPa ( α = 50°). The maximum deformation remained at the fovea capitis but increased to 131.87 mm ( α = 10°), 181.96 mm ( α = 20°), 228.2 mm ( α = 30°), 271.15 mm ( α = 40°), and 307.41 mm ( α = 50°). One-Way ANOVA revealed that traction angle significantly influenced the stress distribution (F = 4.419, p = 0.0022) and deformation magnitude (F = 4.023, p = 0.0040) at the proximal femur, indicating that traction angle is a critical factor affecting stress distribution and deformation.
CONCLUSION: With the increase of the traction angle, the mechanical properties of the proximal femur decrease, indicating an increased risk of non-union and complications. Additionally, the study proves the effectiveness of the "dynamic parallel traction" theory.
METHOD: A digital 3D femur model was constructed using high-resolution computed tomography data of the lower limbs of a 70-year-old elderly subject. An axial compression of 500N was applied at different traction angles (0°, 10°, 20°, 30°, 40°, 50°). The equivalent stress distribution and deformation of the femur geometric model were calculated at each angle under the six α angles. Statistical analysis was performed using One-Way ANOVA.
RESULTS: At the parallel angle ( α = 0°), the maximum stress on the entire femur occurred at the trochanteric fossa, with a value of 7.945 MPa ( α = 0°). The maximum deformation was at the fovea capitis, with a value of 104.13 mm ( α = 0°). As the traction angle gradually increased ( α = 10°, α = 20°, α = 30°, α = 40°, α = 50°), the maximum stress shifted gradually to the medial cortex of the femoral shaft, with values of 11.236 MPa ( α = 10°), 15.196 MPa ( α = 20°), 19.263 MPa ( α = 30°), 23.149 MPa ( α = 40°), and 26.311 MPa ( α = 50°). The maximum deformation remained at the fovea capitis but increased to 131.87 mm ( α = 10°), 181.96 mm ( α = 20°), 228.2 mm ( α = 30°), 271.15 mm ( α = 40°), and 307.41 mm ( α = 50°). One-Way ANOVA revealed that traction angle significantly influenced the stress distribution (F = 4.419, p = 0.0022) and deformation magnitude (F = 4.023, p = 0.0040) at the proximal femur, indicating that traction angle is a critical factor affecting stress distribution and deformation.
CONCLUSION: With the increase of the traction angle, the mechanical properties of the proximal femur decrease, indicating an increased risk of non-union and complications. Additionally, the study proves the effectiveness of the "dynamic parallel traction" theory.