MedElevator Войти в исследования
← Поиск публикаций

DOI 10.1016/j.injury.2021.04.058

Медицинская библиотека · Injury · 2021

Screw-blade fixation systems for implant anchorage in the femoral head: Horizontal blade orientation provides superior stability.

Schopper Clemens, Keck Katharina, Zderic Ivan, Migliorini Filippo, Link Björn-Christian, Beeres Frank J P, Babst Reto, Nebelung Sven, Eschbach Daphne, Knauf Tom, Ganse Bergita, Schoeneberg Carsten, Hildebrand Frank, Gueorguiev Boyko, Knobe Matthias

СтатьяПеревод в очереди

Аннотация

OBJECTIVES

Despite continual improvement in the methods and devices used for treatment of proximal femoral fractures, unacceptably high failure rates remain. Novel screw-blade implant systems, combining a lag screw with a blade - the latter adding rotational stability to the femoral head - offer improvement of osseous purchase, especially in osteoporotic bone. The aim of this study was to compare biomechanically the head element (HE) anchorage of two screw-blade implant systems differing in blade orientation in the femoral head - vertical versus horizontal.

METHODS

Twenty paired human cadaveric femoral heads were assigned to four groups (n = 10), implanted with either Rotationally Stable Screw-Anchor HE (RoSA-HE, vertical blade orientation) or Gamma3 Rotation Control Lag Screw (Gamma-RC, horizontal blade orientation) in center or off-center position, and biomechanically tested until failure under progressively increasing cyclic loading at 2 Hz.

RESULTS

Cycles to failure and failure load were significantly higher for Gamma-RC versus RoSA-HE in center position and not significantly different between them in off-center position, p = 0.03 and p = 0.22, respectively. In center position, the progression of both rotation around implant axis and varus deformation over time demonstrated superiority of the implant with horizontal versus vertical blade orientation. Compared with center positioning, off-center implant placement led to a significant decrease in stiffness, cycles to failure and failure load for Gamma-RC, but not for RoSA-HE, p < 0.01 and p = 0.99, respectively.

CONCLUSION

Horizontal blade orientation of screw-blade implant systems demonstrates better anchorage in the femoral head versus vertical blade orientation in center position. As the stability of the implant system with horizontal blade orientation drops sharply in off-center position, central insertion is its placement of choice.

Для цитирования: Schopper Clemens, Keck Katharina, Zderic Ivan, Migliorini Filippo, Link Björn-Christian, Beeres Frank J P, Babst Reto, Nebelung Sven, Eschbach Daphne, Knauf Tom, Ganse Bergita, Schoeneberg Carsten, Hildebrand Frank, Gueorguiev Boyko, Knobe Matthias. Screw-blade fixation systems for implant anchorage in the femoral head: Horizontal blade orientation provides superior stability.. Injury. 2021. DOI: 10.1016/j.injury.2021.04.058.

Предметные рубрики MeSH

Подготовка и перевод публикации
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…

История · было → стало

Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.

Тип публикации указан по данным источника. Уровень доказательности автоматически не присваивается.