DOI 10.1016/j.jhsa.2024.11.005
Biomechanical Comparison of Volar Plate Repair Versus Volar Plate Repair With Suture Tape Augmentation at the Finger Proximal Interphalangeal Joint.
Аннотация
PURPOSE: The purpose of this study was to perform a biomechanical comparison of volar plate repair alone versus volar plate repair with suture tape augmentation in a hyperextension laxity injury model at the proximal interphalangeal (PIP) joint.
METHODS
Ten matched cadaveric fingers were obtained from five cadavers (average age, 59 ± 7 years). The specimens underwent 5 and 10 N·cm of extension load at the PIP joint to measure the laxity of the intact joint. Next, an injury model was created by incising the proximal volar plate and loading the specimen on a testing machine to 30° of hyperextension; laxity testing was repeated. Within each matched pair, one side was used for volar plate repair, and the contralateral side was used for volar plate repair with suture tape augmentation. Laxity measurements were repeated. The specimens were then loaded from 2 to 5 N·cm for 30 cycles, and then loaded to failure.
RESULTS
In both groups, extension angle significantly increased following PIP joint injury. Both repair groups significantly decreased extension angle compared with injury. Specimens that underwent volar plate repair with suture tape augmentation demonstrated significantly increased stiffness at 10, 20, and 30 cycles compared with volar plate repair alone (3.4, 3.5, and 3.6 N·cm/° vs 2.5, 2.5, and 2.6 N·cm/°, respectively), a higher yield load (16.7 vs 12.4 N·cm), and ultimate load (25.9 vs 19.1 N·cm) and absorbed more energy at ultimate load (4.1 vs 2.6 N·cm).
CONCLUSIONS
Suture tape augmentation increased construct stiffness, yield load, load to failure, and ultimate load in this biomechanical study and may offer additional support in volar plate repair for chronic PIP joint hyperextension laxity.
CLINICAL RELEVANCE: This finding lends support to using suture tape as an augment to produce a stronger PIP joint repair, potentially leading to an expedited recovery and earlier return to activities.
Предметные рубрики MeSH
Подготовка и перевод публикации
Обработка статьи · этапы, ошибки и управление
Ошибки и ограничения
История · было → стало
Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.
Тип публикации указан по данным источника. Уровень доказательности автоматически не присваивается.