Work (Reading, Mass.) · 2024
The ACGIH TLV for lifting: Estimated TLVs for torso asymmetry beyond 30 degrees.
СтатьяНазвание и аннотация: Перевод в очереди
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…
Ошибки и ограничения
История · было → стало
Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.
Jorgensen Michael J, Hafez Khaled, Hakansson Nils A
Аннотация
BACKGROUND: The American Conference of Governmental Industrial Hygienists (ACGIH) Threshold Limit Values (TLVs) for Lifting is a manual material handling (MMH) assessment method to identify weight limits that nearly all workers may be exposed to without developing work-related low back disorders (LBD). However, this assessment method only applies to lifting with the torso within 30° asymmetry of the sagittal plane.
OBJECTIVE: Estimate TLV weight limits while lifting with torso asymmetry greater than 30° beyond the sagittal plane.
METHODS: Lifting tasks were performed from various horizontal and vertical locations, at torso asymmetry angles of 0°, 15°, 30°, 45°, 60°, 75° and 90°, using ACGIH identified TLVs. Validated MMH assessment methods (NIOSH Lifting Equation, Ohio State University LBD Risk Model) were utilized to estimate TLVs at torso asymmetries greater than 30°.
RESULTS: The current ACGIH TLVs resulted in low- to moderate-risk risk levels for torso asymmetries from 0° to 30°, and the risk incrementally increased as torso asymmetry increased to 90°. With the intention to keep the risk levels to that found at 30° torso asymmetry, lower TLV weight limits in the vertical and horizontal zones investigated were estimated for torso asymmetries from 45° to 90°. The resulting adjusted TLVs were consistent with weight limits identified for similar lifting conditions from other assessment methods that account for torso asymmetry.
CONCLUSIONS: This research found current ACGIH-defined TLVs possess less than high-risk for LBD, and provided guidance to practitioners for reduced TLVs when torso asymmetry is greater than 30° from the sagittal plane.
OBJECTIVE: Estimate TLV weight limits while lifting with torso asymmetry greater than 30° beyond the sagittal plane.
METHODS: Lifting tasks were performed from various horizontal and vertical locations, at torso asymmetry angles of 0°, 15°, 30°, 45°, 60°, 75° and 90°, using ACGIH identified TLVs. Validated MMH assessment methods (NIOSH Lifting Equation, Ohio State University LBD Risk Model) were utilized to estimate TLVs at torso asymmetries greater than 30°.
RESULTS: The current ACGIH TLVs resulted in low- to moderate-risk risk levels for torso asymmetries from 0° to 30°, and the risk incrementally increased as torso asymmetry increased to 90°. With the intention to keep the risk levels to that found at 30° torso asymmetry, lower TLV weight limits in the vertical and horizontal zones investigated were estimated for torso asymmetries from 45° to 90°. The resulting adjusted TLVs were consistent with weight limits identified for similar lifting conditions from other assessment methods that account for torso asymmetry.
CONCLUSIONS: This research found current ACGIH-defined TLVs possess less than high-risk for LBD, and provided guidance to practitioners for reduced TLVs when torso asymmetry is greater than 30° from the sagittal plane.