Effect of Material Hardness on Friction Between a Bare Finger and Dry and Lubricated Artificial Skin.

Understanding the tribological phenomena when fingers slide over soft surfaces such as skin is important for many practical applications. Therefore, this article analyzed the coefficients of friction for a bare finger sliding over artificial skin with different hardness under dry and lubricated surface conditions. This article contrasts with previous research that predominantly analyzed the contact between skin and hard surfaces or probes. Under dry conditions, the coefficient of friction was constant for artificial skins that were harder than the finger pad, irrespective of the normal force of the finger. However, the coefficient of friction decreased with increasing normal force for softer artificial skins. When the surface of the artificial skin model was lubricated with mica, the coefficient of friction exhibited normal-force dependence only for soft artificial skins, similar to the observations under dry conditions. This effect was due to the deformation friction; thus, the coefficient of friction increased as the normal force increased. Conversely, when the model was lubricated with TiO2, the coefficient of friction depended on the normal force for all hardness levels. These findings provide insights into the friction experienced during skin-skin or skin-soft material contact under dry and lubricated conditions that can easily occur in daily life. Thus, the results of this study can be useful for the development of skin care products or assistive robots involving human-robot contact.