MedElevator Войти в исследования
← Поиск публикаций

DOI 10.1016/j.jos.2024.11.012

Медицинская библиотека · Journal of orthopaedic science : official journal of the Japanese Orthopaedic Association · 2025

Two types of cannulated screw fixation based on Letenneur classification for the treatment of Hoffa fracture: A finite element analysis.

Jia Peng, Chang Xiaohu, Tang Xin

СтатьяПеревод в очереди

Аннотация

PURPOSE: A finite element analysis was performed to simulate the biomechanical differences between anterior-posterior (AP) direction and posterior-anterior (PA) direction placement of two cannulated screws in Hoffa fractures.

METHODS

Computed tomography images of an healthy male volunteer were used to simulate Letenneur Ⅰ, Ⅱa, Ⅱb, Ⅱc, Ⅲ Hoffa fractures, and two groups of screw internal fixation models were constructed. Two 6.5 mm cannulated screws were implanted parallel in the AP direction or the PA direction. The biomechanical test was performed to determine the displacement, stress distribution, and peaks in the distal femur and cannulated screws in 10 models.

RESULTS

The displacement distribution and peak values of the distal femur and cannulated screws in both groups were similar, and displacement increasing as the load increased. The stress distribution in the distal femur was similar between the two groups, with stress mainly concentrated on both sides of the fracture line, the posterolateral and anterior aspects of the femoral shaft. The peak stress in the PA group of the Letenneur type Ⅱb was significantly higher than that in the AP group, and the stress in the distal femur increased with increasing load. The stress distribution in the cannulated screws of Letenneur Ⅰ, Ⅱa, Ⅱb, and Ⅲ, was similar, but differences are observed between the two groups in type Ⅱc. The stress in the cannulated screws increased with increasing load, and the peak values in the PA group are significantly higher than those in the AP group.

CONCLUSION

The mechanical stability of the two screw insertion methods is similar. Inserting screws from anterior to posterior can reduce the stress on the distal femur and cannulated screws, and also minimize the dissection of the posterior soft tissues. Therefore, inserting screws from anterior to posterior is a more recommended surgical approach for Hoffa fractures.

Для цитирования: Jia Peng, Chang Xiaohu, Tang Xin. Two types of cannulated screw fixation based on Letenneur classification for the treatment of Hoffa fracture: A finite element analysis.. Journal of orthopaedic science : official journal of the Japanese Orthopaedic Association. 2025. DOI: 10.1016/j.jos.2024.11.012.

Предметные рубрики MeSH

Подготовка и перевод публикации
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…

История · было → стало

Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.

Тип публикации указан по данным источника. Уровень доказательности автоматически не присваивается.