[Avantage double mobility press--fit cup in total hip arthroplasty].

The Avantage double mobility press-fit cup was devised by Dr. Bousquet in the 70's to bring reasonable response to a problem of recurrent dislocation after total hip arthroplasty. The cup is attached to the femoral head by a bipolar polyethylene liner. The polyethylene liner moves freely inside a shiny--polished metal cup. The angular range of motion before impingement is increased by the mobility of the liner. The double connection (cup-liner, liner-head) reduces the stress on the metal cup and improve the stability of the prosthesis. The solution has proved to be efficient in reducing dislocation risk and maintains at the same time the appropriate range of motion. Between January 2004 and November 2005, 113 hip arthroplasties in 108 women with use of the double mobility cup were performed. The cemented version of the Avantage cup was inserted in 15 patients (mean age--76.9 years). Uncemented, HA coated implant was used in 98 patients (with mean age of 55 years). The mean follow-up was 20.4 months. No one patient was lost to follow-up. No postoperative dislocation was observed during follow-up. There was no unwanted leg lengthening greater than 1 cm. The Avantage cup may be indicated in any primary total hip arthroplasty especially in those with increased risk of postoperative dislocations. This cup enables a correct balance of the hip without a need of the unwanted lengthening of the leg.