Experimental Study on the Shear Failure Properties and Damage Constitutive Model of Rocks.

In the construction of underground geological engineering, a variety of rocks were often encountered, and the engineering surrounding rocks was prone to shear fracturing. Shear mechanics tests were conducted on a variety of rocks under various joint angles. By studying the shear mechanical characteristics, acoustic emission behavior, and damage degree of the different rock types, we can obtain an insight into their bearing capacity and fracture mechanisms. An obvious inflection point from the elastic to plastic behavior can be observed for the specimens during the process of shear mechanics tests, and the shear behavior was divided into three phases. The acoustic emission signals significantly increased for coal during the second phase, while those of sandstone and shale start to increase during the third phase, which is from the peak point to fracture. The analyses of the shear failure and acoustic emission properties showed that the crack propagation angle increases as the normal stress of rock increases. It was proved that the joint angles and normal stresses of rock could effectively hinder the development of vertical fractures. Based on the shear failure and acoustic emission properties, a constitutive model capable of describing the shear behavior of different types of rocks was developed. This constitutive model can accurately describe the shear fracture properties of the various rocks. The shear failure properties and damage constitutive model of rocks in this study can be used to reduce engineering surrounding rock instability caused by shear.