Symphyseal plating for pelvic fracture in a morbidly obese patient: operative challenges and innovation of a novel 'wire-ramp plate-sliding method'.

We are describing a case report of a morbidly obese patient (body mass index 41) in his mid-40s with Young and Burgess Anteroposterior Compression type II injury (AO Foundation/Orthopaedic Trauma Association type B1.2) managed by symphyseal plating. Morbid obesity made working at a depth very difficult; hence, we adopted a novel 'wire-ramp plate-sliding method'. In this method, two strong sturdy K-wires inserted through the medial-most plate holes into the pubis acted as a ramp over which the plate was pushed/slid distally. During this manoeuvre, the K-wires passing through the plate holes were used as a reduction tool. The patient also had a wedge fracture of the distal femoral shaft which was managed by retrograde femoral nailing. At 1-year follow-up, the pelvic continuity is maintained and the fracture has united. The patient is able to do full weight-bearing and is back to his normal life.