MedElevator Войти в исследования
← Поиск публикаций

DOI 10.1016/j.clinbiomech.2017.03.013

Медицинская библиотека · Clinical biomechanics (Bristol, Avon) · 2017

Anterolateral ligament reconstruction with autologous grafting: A biomechanical study.

Monaco E, Lanzetti R M, Fabbri M, Redler A, De Carli A, Ferretti A

СтатьяПеревод в очереди

Аннотация

BACKGROUND

To evaluate the reliability of the Iliotibial band compared to gracilis tendon as a graft to be used in anterolateral ligament reconstruction.

METHODS

Gracilis tendon and a strip of Iliotibial band compared were harvested from 8 fresh human cadaveric knees. The gracilis tendon was prepared to obtain a graft of 10cm in length (Group 1). Iliotibial band compared was prepared to obtain a graft of 10cm in length and 0.5cm in width from the middle portion (Group 2). All the specimens were fixed on a servo hydraulic tensile machine with dedicated cryo-clamp. The loading protocol, used to compare the previously published results of ultimate failure load and Stiffness of the anterolateral ligament (Group 3), included a cyclic preconditioning between 10 and 25N at 0.1Hz for 10cycles and then a load to failure test at 20mm/min.

FINDINGS: Gracilis tendon showed higher Ultimante Failure Load and stiffness when compared to a strip of Iliotibial band. Gracilis tendon and a strip of Iliotibial band compared showed higher Ultimante Failure Load and stiffness when compared with native anterolateral ligament as reported by Kennedy.

INTERPRETATION: Both grafts tested in the present studies are suitable for an anatomical anterolateral ligament reconstruction.

Для цитирования: Monaco E, Lanzetti R M, Fabbri M, Redler A, De Carli A, Ferretti A. Anterolateral ligament reconstruction with autologous grafting: A biomechanical study.. Clinical biomechanics (Bristol, Avon). 2017. DOI: 10.1016/j.clinbiomech.2017.03.013.

Предметные рубрики MeSH

Подготовка и перевод публикации
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…

История · было → стало

Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.

Тип публикации указан по данным источника. Уровень доказательности автоматически не присваивается.