MedElevator Войти в исследования
← Поиск публикаций

DOI 10.1016/j.jdent.2022.104271

Медицинская библиотека · Journal of dentistry · 2022

Fractographic analysis of 35 clinically fractured bi-layered and monolithic zirconia crowns.

Skjold Anneli, Schriwer Christian, Gjerdet Nils Roar, Øilo Marit

СтатьяПеревод в очереди

Аннотация

OBJECTIVES

The aim of this retrieval study was to analyze the fracture features and identify the fracture origin of zirconia-based single crowns that failed during clinical use.

METHODS

Thirty-five fractured single crowns were retrieved from dental practices (bi-layered, n = 15; monolithic, n = 20). These were analyzed according to fractographic procedures by optical and scanning electron microscopy to identify fracture patterns and fracture origins. The fracture origins were closely examined. The crown margin thickness and axial wall height were measured.

RESULTS

Three types of failure modes were observed: total fractures, marginal semilunar fractures, and incisal chippings. Most of the crowns (23) had fracture origins at the crown margin and seven of them had defects in the fracture origin area. The exact fracture origin was not possible to identify due to missing parts in four crowns. The crown wall thickness was 20% thinner and wall height 30% shorter in the fracture origin area compared to the opposite side.

CONCLUSIONS

The findings in this study show that fractography can reveal fracture origins and fracture modes of both monolithic and bi-layered dental zirconia. The findings indicate that the crown margin on the shortest axial wall is the most common fracture origin site.

CLINICAL SIGNIFICANCE: Crown design factors such as material thickness at the margin, axial wall height and preparation type affects the risk of fracture. It is important to ensure that the crown margins are even and flawless.

Для цитирования: Skjold Anneli, Schriwer Christian, Gjerdet Nils Roar, Øilo Marit. Fractographic analysis of 35 clinically fractured bi-layered and monolithic zirconia crowns.. Journal of dentistry. 2022. DOI: 10.1016/j.jdent.2022.104271.

Предметные рубрики MeSH

Подготовка и перевод публикации
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…

История · было → стало

Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.

Тип публикации указан по данным источника. Уровень доказательности автоматически не присваивается.