MedElevator Войти в исследования
← Поиск публикаций

DOI 10.3390/ma15145037

Медицинская библиотека · Materials (Basel, Switzerland) · 2022

Influence Mechanisms of Inclusion Types on Rotating Bending Fatigue Properties of SAE52100 Bearing Steel.

Shi Zhiyue, Li Jingjing, Zhang Xiaodan, Shang Chengjia, Cao Wenquan

СтатьяПеревод в очереди

Аннотация

The rotating bending fatigue crack sources of SAE52100 high carbon bearing steel were studied in this paper. On the fatigue fracture surfaces, inclusions for crack initiation are mainly Ca-Al-O and TiN inclusions, and the size of TiN inclusions is much smaller than that of Ca-Al-O inclusions. The analysis of inclusions by Aspex shows that the number and size of Ca-Al-O inclusions in the matrix are much larger than those of TiN inclusions. Combined with the calculation of stress intensity factor and the analysis of stress concentration factor, the sharp angle characteristic of TiN inclusions is the main reason for its stronger deterioration to fatigue properties, and the damaging effect of TiN inclusions with the same size to the matrix fatigue properties is about 1.33-1.67 times that of Ca-Al-O inclusions.

Для цитирования: Shi Zhiyue, Li Jingjing, Zhang Xiaodan, Shang Chengjia, Cao Wenquan. Influence Mechanisms of Inclusion Types on Rotating Bending Fatigue Properties of SAE52100 Bearing Steel.. Materials (Basel, Switzerland). 2022. DOI: 10.3390/ma15145037.
Подготовка и перевод публикации
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…

История · было → стало

Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.

Тип публикации указан по данным источника. Уровень доказательности автоматически не присваивается.