Transient Interporosity Flow in Shale/Tight Oil Reservoirs: Model and Application.

The dual-porosity model has been used widely to describe the fracture network in well test or numerical simulation due to the high computational efficiency. The shape factor, which can be used to determine the capability of mass transfer between the matrix and fracture, is the core of the dual-porosity model. However, the conventional shape factor, which is usually obtained under pseudo-steady state assumption, has certain limitation in characterization of the mass transfer efficiency in a shale/tight reservoir. In this study, a new transient interporosity flow model has been established by considering the influence of nonlinear flow, stress sensitivity, and fracture pressure depletion. To solve this new model, a finite difference and Newton iteration method was applied. According to the Duhamel principle, the solution for time-dependent fracture pressure boundary condition has been obtained. The solution has been verified by using the fine-grid finite element method. Then, the influence of nonlinear flow, stress sensitivity, and fracture pressure depletion on shape factor and interporosity flow rate has been studied. The study results show that constant shape factors are not suitable for unconventional reservoirs, and the interporosity flow in the shale/tight reservoir is controlled by multiple factors. The new model can be used in test interpretation and numerical simulation, and also provides a new approach for the optimization of the perforation cluster number.