MedElevator Войти в исследования
← Поиск публикаций

DOI 10.1080/10255842.2022.2030730

Медицинская библиотека · Computer methods in biomechanics and biomedical engineering · 2022

Modeling attachment and compressive loading of locking and non-locking plate fixation: a finite element investigation of a supracondylar femur fracture model.

Samiezadeh Amir, McLachlin Stewart, Ng Matthew, Samiezadeh Saeid, Larouche Jeremie, Whyne Cari

СтатьяПеревод в очереди

Аннотация

This study developed a finite element (FE) model of simulated locking plate fixation to examine the strain response following supracondylar femoral plate attachment and under compressive loading. An implicit FE model of a synthetic femur with a distal fracture gap stabilized with a lateral plate was evaluated following attachment and 500 N loading, considering locking and non-locking proximal screws configurations. Screw pre-tension values of 60 N for both distal and proximal non-locking screws yielded good agreement with plate experimental strain data in attached (unloaded) and loaded conditions. The results highlight the importance of pre-tensioning in modeling plate attachment using non-locking screws.

Для цитирования: Samiezadeh Amir, McLachlin Stewart, Ng Matthew, Samiezadeh Saeid, Larouche Jeremie, Whyne Cari. Modeling attachment and compressive loading of locking and non-locking plate fixation: a finite element investigation of a supracondylar femur fracture model.. Computer methods in biomechanics and biomedical engineering. 2022. DOI: 10.1080/10255842.2022.2030730.

Предметные рубрики MeSH

Подготовка и перевод публикации
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…

История · было → стало

Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.

Тип публикации указан по данным источника. Уровень доказательности автоматически не присваивается.