Foot and ankle surgery : official journal of the European Society of Foot and Ankle Surgeons · 2021
Biomechanical comparison of four different posterior malleolus fixation techniques: A finite element analysis.
СтатьяНазвание и аннотация: Перевод в очереди
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…
Ошибки и ограничения
История · было → стало
Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.
Mansur Henrique, Lucas Phelipe Pinheiro Alves, Vitorino Ricardo Carvalho, Barin Fabrício Reichert, Freitas Anderson, Battaglion Leonardo Rigobello, Ramos Lucas Sacramento
Аннотация
PURPOSE: The objective of this study was to compare the biomechanical behavior of four fixation methods for posterior malleolar fracture (PMF) by finite element analysis (FEM).
METHODS: Four internal fixation techniques used for fixation of PMF were assessed by FEM - a computational study: posterior one-third tubular 3.5 mm buttress plate (PP) with one screw (PP 1 screw), PP with two screws (PP 2 screws), two cannulated 3.5 mm lag screws in the antero-posterior (AP) direction (AP lag screws), and two postero-anterior (PA) cannulated 3.5 mm lag screws (PA lag screws). PMF with 30% and 50% fragment sizes were simulated through computational processing reconstructed from computed tomography (CT). The simulated loads of 700 N and 1500 N were applied to the proximal tibial end. The FEM evaluated the total and localized displacements of the PMF. For the analysis of stresses, the variables maximum principal (traction) and minimum principal (compression) were used. For the metallic implants, the equivalent von Mises stress (VMS) was used.
RESULTS: PA lag screw showed the lowest values for total and localized displacement, minimum and maximum total stress, and VMS in both physiological conditions and sizes of posterior malleolus involvement. The localized displacement was statistically lower for lag screws compared to PP techniques at 700 N (p < 0.05) and 1200 N (p < 0.05). The maximum total stress was statistically lower for PA lag screws compared to PP 1 fixation with 700 N (p = 0.03) and 1200 N (p = 0.039).
CONCLUSION: PA lag screws yield better results in terms of total and localized displacement, minimum and maximum total stress, and VMS in both physiological conditions and sizes of posterior malleolus involvement. These results demonstrate that PA lag screws are biomechanically the most efficient technique for the fixation of PMF.
METHODS: Four internal fixation techniques used for fixation of PMF were assessed by FEM - a computational study: posterior one-third tubular 3.5 mm buttress plate (PP) with one screw (PP 1 screw), PP with two screws (PP 2 screws), two cannulated 3.5 mm lag screws in the antero-posterior (AP) direction (AP lag screws), and two postero-anterior (PA) cannulated 3.5 mm lag screws (PA lag screws). PMF with 30% and 50% fragment sizes were simulated through computational processing reconstructed from computed tomography (CT). The simulated loads of 700 N and 1500 N were applied to the proximal tibial end. The FEM evaluated the total and localized displacements of the PMF. For the analysis of stresses, the variables maximum principal (traction) and minimum principal (compression) were used. For the metallic implants, the equivalent von Mises stress (VMS) was used.
RESULTS: PA lag screw showed the lowest values for total and localized displacement, minimum and maximum total stress, and VMS in both physiological conditions and sizes of posterior malleolus involvement. The localized displacement was statistically lower for lag screws compared to PP techniques at 700 N (p < 0.05) and 1200 N (p < 0.05). The maximum total stress was statistically lower for PA lag screws compared to PP 1 fixation with 700 N (p = 0.03) and 1200 N (p = 0.039).
CONCLUSION: PA lag screws yield better results in terms of total and localized displacement, minimum and maximum total stress, and VMS in both physiological conditions and sizes of posterior malleolus involvement. These results demonstrate that PA lag screws are biomechanically the most efficient technique for the fixation of PMF.