Bonding performance and mechanical properties of flowable bulk-fill and traditional composites in high c-factor cavity models.

OBJECTIVES

The aim of this study is to evaluate bond strength (BS), shrinkage stress (SS), flexural strength (FS), and elastic modulus (E) of three flowable bulk fill in comparison with conventional composites.

MATERIALS AND

METHODS

Three bulk fill (Filtek Bulk Fill Flow, Surefil SDR, X-tra Base) and three conventional composites (Filtek Z250 XT, Grandioso, Dentsply TPH3) were used. For BS, conical cavities (n = 10) were prepared in bovine dentine and restored with materials and were analyzed through push-out test in a universal testing machine (UTM). For FS/EM, 60 (n = 10) bar specimens (7 mm × 2 mm × 1 mm) were prepared and evaluated with a UTM. SS was measured in UTM coupled to an extensometer (n = 5). The data were statistically evaluated using one-way ANOVA/Tukey tests (P < 0.05).

RESULTS

Conventional composites showed higher E when compared to bulk-fill composites. Regarding FS, they showed similar results, except for (XBF) Xtra Bulk Fill that was inferior. SS and BS of bulk-fill composites were significantly lower and higher than conventional composites, respectively, except for XBF, which showed similar BS to conventional ones.

CONCLUSIONS

Flowable bulk-fill composites, except XBF, showed higher BS, lower SS, similar FS, and lower E when compared to conventional ones.