Evaluation of a new computer-assisted surgical planning and navigation system based on two-dimensional fluoroscopy for insertion of a proximal femoral nail: an experimental study.

Pertrochanteric femoral fractures are common and intramedullary nailing is an accepted method for their surgical treatment. Accurate placement of the implant is essential to ensure fixation. The conventional technique can require multiple guide wire passes, and relies heavily on fluoroscopy. A computer-assisted planning and navigation system based on two-dimensional fluoroscopy for guide wire placement in the femoral neck has been developed, in order to perform intramedullary pertrochanteric fracture fixation using the proximal femoral nail (PFNA). The planning process was supported by a 'zero-dose C-arm navigation' system. The PFNA was inserted into 12, intact, femoral sawbones guided by the computer-based navigation, and into 12, intact, femoral sawbones using a conventional fluoroscopic-assisted technique. Guide wire and subsequent blade placement in the femoral neck was evaluated. The computer-assisted technique achieved a significant decrease in the number of required fluoroscopic images and in the number of guide wire passes. The obtained average blade placement accuracy in the femoral neck was equivalent to the conventional technique. The operation time was significantly longer in the navigation-assisted group. The addition of computer-assisted planning and surgical guidance to the intramedullary nailing of pertrochanteric femoral fractures offers a number of clinical benefits based on the results of this sawbone study. Further studies including fractured sawbones and cadaver models with extension of the navigation process to all steps of PFNA introduction and with the goal of reducing operation time are indispensable before integration of this navigation system into clinical practice.