Lightweight implants in breast reconstruction.
Аннотация
OBJECTIVE
Since the first use of silicone implants by Cronin in 1962, there have been several attempts to introduce alternative filling materials for breast implants on the market. A promising new development are lightweight implants, whose filler material is one third lighter than conventional silicone gel. While these implants have been used primarily for aesthetic augmentation, a benefit could be expected particularly in post-mastectomy reconstruction.
MATERIALS AND
METHODS
Since 2019, 92 operations using lightweight implants have been performed at our clinic, 61 of them for breast reconstruction after mastectomy. These have been compared to 92 breast reconstructions using conventional silicone implants.
RESULTS
The average volume of the lightweight implants was 30% higher than of the conventional implants (452 ml resp. 347 ml), whereas the implant weight was comparable in both groups (317 g resp. 347 g). Grade 3-4 capsular fibrosis was seen in 6 cases in both groups; revision was required 9 times (lightweight implants) and 7 times (conventional silicone implants) during the follow-up period.
DISCUSSION: To our knowledge, this is the first study to investigate the use of lightweight implants in breast reconstruction. With exception of the filler material, the implants used in the two groups were comparable in shape and surface. The inserted lightweight implants had a greater volume but nearly the same weight as the conventional implants and were used in patients with a higher body mass index. Thus, lightweight implants were preferred in patients whose reconstruction required a larger implant volume.
CONCLUSION
Lightweight implants are a new alternative for breast reconstruction especially in case that larger implant volume is demanded. The increased complication rate has to be verified in further studies.
Предметные рубрики MeSH
Подготовка и перевод публикации
Обработка статьи · этапы, ошибки и управление
Ошибки и ограничения
История · было → стало
Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.
Тип публикации указан по данным источника. Уровень доказательности автоматически не присваивается.