Bio-medical materials and engineering · 2021
A finite element model of the human lower thorax to pelvis spinal segment: Validation and modal analysis.
СтатьяНазвание и аннотация: Перевод в очереди
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…
Ошибки и ограничения
История · было → стало
Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.
Fan Wei, Zhao Dan, Guo Li-Xin
Аннотация
BACKGROUND: Several finite element (FE) models have been developed to study the effects of vibration on human lumbar spine. However, the authors know of no published results so far that have proposed computed tomography-based FE models of whole lumbar spine including the pelvis to conduct dynamic analysis.
OBJECTIVE: To create and validate a three-dimensional ligamentous FE model of the human lower thorax to pelvis spinal segment (T12-Pelvis) and provide a detailed simulation environment to investigate the dynamic characteristics of the lumbar spine under whole body vibration (WBV).
METHODS: The T12-Pelvis model was generated based on volume reconstruction from computed tomography scans and validated against the published experimental data. FE modal analysis was implemented to predict dynamic characteristics associated with the first-order vertical resonant frequency and vibration mode of the model with upper body mass of 40 kg under WBV.
RESULTS: It was found that the current FE model was validated and corresponded closely with the published data. The obtained results from the modal analysis indicated that the first-order vertical resonant frequency of the T12-Pelvis model was 6.702 Hz, and the lumbar spine mainly performed vertical motion with a small anteroposterior motion. It was also found that shifting the upper body mass centroid onwards or rearwards from the normal upright sitting posture reduced the vertical resonant frequency.
CONCLUSIONS: These findings may be helpful to better understand vibration response of the human spine, and provide important information to minimize injury and discomfort for these WBV-exposed occupational groups.
OBJECTIVE: To create and validate a three-dimensional ligamentous FE model of the human lower thorax to pelvis spinal segment (T12-Pelvis) and provide a detailed simulation environment to investigate the dynamic characteristics of the lumbar spine under whole body vibration (WBV).
METHODS: The T12-Pelvis model was generated based on volume reconstruction from computed tomography scans and validated against the published experimental data. FE modal analysis was implemented to predict dynamic characteristics associated with the first-order vertical resonant frequency and vibration mode of the model with upper body mass of 40 kg under WBV.
RESULTS: It was found that the current FE model was validated and corresponded closely with the published data. The obtained results from the modal analysis indicated that the first-order vertical resonant frequency of the T12-Pelvis model was 6.702 Hz, and the lumbar spine mainly performed vertical motion with a small anteroposterior motion. It was also found that shifting the upper body mass centroid onwards or rearwards from the normal upright sitting posture reduced the vertical resonant frequency.
CONCLUSIONS: These findings may be helpful to better understand vibration response of the human spine, and provide important information to minimize injury and discomfort for these WBV-exposed occupational groups.