International journal of molecular sciences · 2026
Solar Cells Based on PTB7-Fx: PC71BM Active Layer Processed with Two Types of Solvent Additives and Sputtered Ag Top-Electrode.
СтатьяНазвание и аннотация: Перевод в очереди
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…
Ошибки и ограничения
История · было → стало
Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.
Grancharov Georgy, Gergova Rositsa, Popkirov Georgi, Dikov Hristosko, Sendova-Vassileva Marushka
Аннотация
Organic-type solar cells containing an active layer of block copolymer donor PTB7-Fx (x = 0, 20, and 100), based on benzo [1,2-b:4,5-b']dithiophene and variably fluorinated thieno [3,4-b]thiophene units, and fullerene acceptor [6,6]phenyl-C71-methylbutyrate, were constructed. The active layer thin film of the solar cells was obtained from a dichlorobenzene solution at an established concentration via spin-coating of the donor-acceptor mixture in the presence of solvent additives such as 3% diiodooctane and 1% triethyl phosphate. Organic photovoltaic elements with normal device architecture were prepared on glass substrates using an indium tin oxide anode, a spin-coated hole transporting layer of poly(ethylene dioxythiophene):polystyrenesulfonate, the aforementioned active layer, followed by an electron transporting layer of zinc oxide nanoparticles, and finally a magnetron sputtered silver (Ag) top-electrode. The optical properties, thin film morphology, and the thickness of the active layers were investigated. Additionally, current density-voltage characteristics and impedance spectra of photovoltaic devices were measured. It was found that PTB7-Fx:PC71BM-based solar cells processed in the presence of two types of solvent additives, diiodooctane and triethyl phosphate, with a sputtered Ag top-electrode display similar absorption and quantum efficiency spectra, as well as comparable current density-voltage characteristics and efficiencies to the same devices fabricated without additives. The diiodooctane solvent additive preferably dissolves the fullerene component and has a positive effect on fill factor enhancement, impedance spectra improvement, and amelioration in charge carrier transport and collection, whereas the triethyl phosphate solvent additive preferentially dissolves the copolymer donor and has a more pronounced impact on the refined morphology of the thin film active layers.