MedElevator Войти в исследования
← Поиск публикаций

DOI 10.1002/advs.77984

Медицинская библиотека · Advanced science (Weinheim, Baden-Wurttemberg, Germany) · 2026

Beyond-Classical Ferroelectric Metamaterials: 3D-Printed Planar Lattices With Programmable Electro-Thermo-Mechanical Coupling.

Shi Jiahao, Ju Kang, Chen Haoyu, Orsat Valerie, Sasmito Agus P, Ahmadi Ali, Akbarzadeh Abdolhamid

СтатьяПеревод в очереди

Аннотация

Conventional porous ferroelectric materials often improve voltage-related figures of merit at the expense of piezoelectric charge coefficients. Here, we establish a topology-polarization co-design strategy for planar lattice-based ferroelectric metamaterials, which integrate underlying geometry, deformation mode, and polarization direction to program thermo-electromechanical responses. Beyond asymptotic homogenization, an analytical model is developed to correlate the effective ferroelectric properties with geometric parameters, and subsequently validated through experiments. Four representative planar lattices with distinct nodal connectivities, spanning stretching- and bending-dominated deformation modes, are explored under transverse and longitudinal polarization conditions. The transversely polarized triangular lattice exhibits an enhanced d33, which increases as the truss inclination angle θ decreases, and reaches approximately twice that of the dense material at θ = 30°. Programmable transverse and shear piezoelectric charge coefficients are achieved, enabling the hydrostatic charge constant to exceed four times that of the solid material and d24 to reach approximately twice the bulk. Owing to the substantial reduction in relative dielectric constant and heat capacity at low relative density, the pyroelectric voltage figure of merit reaches 43 × 10-3 m2/C, more than eight times that of the bulk material. These architected ferroelectric metamaterials offer a promising platform for realizing efficient multifunctional sensing and human-machine interfaces.

Для цитирования: Shi Jiahao, Ju Kang, Chen Haoyu, Orsat Valerie, Sasmito Agus P, Ahmadi Ali, Akbarzadeh Abdolhamid. Beyond-Classical Ferroelectric Metamaterials: 3D-Printed Planar Lattices With Programmable Electro-Thermo-Mechanical Coupling.. Advanced science (Weinheim, Baden-Wurttemberg, Germany). 2026. DOI: 10.1002/advs.77984.
Подготовка и перевод публикации
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…

История · было → стало

Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.

Тип публикации указан по данным источника. Уровень доказательности автоматически не присваивается.