DOI 10.1097/00007632-199909010-00014
The efficacy of head immobilization techniques during simulated vehicle motion.
Аннотация
STUDY
DESIGN
Laboratory experiment.
OBJECTIVE
To compare the efficacy of different head immobilization techniques during motion simulating ambulance transport.
BACKGROUND
A significant number of neurologic injuries associated with cervical spine fractures arise or are aggravated during emergency extrication or patient transport. Previous studies have not addressed the effect of head immobilization on the passive motion that could occur across the neck during transport.
METHODS
Three different head-immobilization methods were compared in six healthy young adults by using a computer-controlled moving platform to simulate the swaying and jarring movements that can occur during ambulance transport. In all tests, the trunk was secured by means of a commonly used "criss-cross" strapping technique. Efficacy of head immobilization was evaluated using measures of head motion and neck rotation.
RESULTS
None of the three immobilization techniques was successful in eliminating head motion or neck rotation. Movement of the trunk contributed substantially to the lateral bending that occurred across the neck. A new product involving the placement of wedges underneath the head provided some small, but statistically significant improvements in fixation of the head to the fracture board; however, there was no improvement in terms of the relative motion occurring across the neck.
CONCLUSIONS
Somewhat improved fixation of the head to the fracture board can be achieved by placing wedges under the head; however, the benefits of any fixation method, in terms of cervical spine immobilization, are likely to be limited unless the motion of the trunk is also controlled effectively. Future research and development should address techniques to better control head and trunk motion.
Предметные рубрики MeSH
Подготовка и перевод публикации
Обработка статьи · этапы, ошибки и управление
Ошибки и ограничения
История · было → стало
Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.
Тип публикации указан по данным источника. Уровень доказательности автоматически не присваивается.