A hybrid system based on the combination of adsorption, electrocoagulation, and wetland treatment for the effective remediation of industrial wastewater from underground coal gasification (UCG).

The study verified the effectiveness of treating post-process underground coal gasification (UCG) wastewater, containing high loads of inorganic and organic pollutants, using constructed wetlands (CW) enhanced by hybrid adsorption and electrocoagulation (EC) techniques. Four different system configurations were tested: wetland, EC/wetland, adsorbent/wetland, and EC/adsorbent/wetland. Each experiment lasted 60 days. The feed and effluents from each treatment step were analysed for their basic physicochemical parameters such as metals and trace elements, phenols, sulphides, cyanides, total organic carbon (TOC), chemical oxygen demand (COD), biological oxygen demand (BOD), benzene, toluene, ethylene, xylene (BTEX), and polyaromatic hydrocarbons (PAHs). Systems with electrocoagulation proved to be effective in the case of metal removal. The best results were obtained for Fe, Ni, Sb and As (up to 96%, 98%, 94% and 82% respectively). The systems were ineffective in removing Mn. All tested systems showed the greatest effectiveness in the treatment of wastewater from phenols, BTEX and CN (almost 100% removal). CWs without preliminary electrocoagulation showed practically 100% effectiveness in removing BTEX after 14 days of treatment. Electrocoagulation was particularly effective in reduction of large quantity of PAH compounds (from 1228 μg/l to below 0.050 μg/l). Effective toxicity reduction from V class to II class after 60 days in comparison with meeting the requirements contained in the Best Available Techniques (BAT) document, showed that all tested systems were favorable in terms of UCG wastewater treatment. A significant decrease in toxicity was observed in just 14 days (around 90% reduction of toxicity measured in TU values for systems without adsorbent and around 75% for systems with adsorbent). The wastewater were still toxic due to the formation of degradation intermediates of organic compounds (BTEX, PAHs, phenol compounds), despite a significant decrease in the concentration of contaminants, therefore toxicity assessment should be one of the evaluation criteria for industrial wastewater treatment.