m+Medelevator.RU
← Поиск публикаций
Polymers · 2026

Metallic (Al and Fe) Powder-Reinforced Styrene-Butadiene Rubber Composites for Triboelectric Energy Harvesting.

СтатьяНазвание и аннотация: Перевод в очереди
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…

История · было → стало

Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.

Alam Md Najib, Dhandapani Vishnu Shankar, Park Sang-Shin

Аннотация

This study explores the energy-harvesting performance of aluminum (Al)- and iron (Fe)-filled styrene-butadiene rubber (SBR) composites, with a focus on their mechanical durability and triboelectric properties. Comprehensive mechanical characterization-including tensile strength, elongation at break, fracture toughness, and elasticity-reveals that Fe-filled composites exhibit significantly enhanced reinforcement compared to Al-filled systems at equivalent filler loadings. Raman spectroscopy indicates that Fe atoms can coordinate with the benzene rings of SBR chains through stronger physicochemical bonding, a feature less present in Al-based composites. In addition to improved mechanical properties, Fe-filled composites demonstrate higher electrical conductivity and superior triboelectric energy-harvesting performance. Notably, the composite containing 15 vol% Fe under 1% cyclic compressive strain achieves a peak current density of 127.05 µA/m2, a total generated charge of 5.01 nC, and a peak power density of 48.22 µW/m2. These values represent substantial enhancements of 246%, 236%, and 2398%, respectively, compared to Al-filled counterparts. Cyclic energy-harvesting tests confirm stable performance with negligible degradation in output or mechanical integrity over repeated cycles. Rubber composite shows good humidity resistance in current and voltage outputs. Furthermore, a layer-by-layer triboelectric nanogenerator (TENG) based on the Fe-filled composite produces output signals of approximately ±1.0 µA and ±5 V under biomechanical hand patting. The superior performance of Fe-based composites is attributed to stronger filler-rubber interactions, likely facilitated by electrostatic interactions, which enhances interfacial charge transfer during mechanical deformation. Overall, Fe-filled SBR composites demonstrate strong potential for cost-effective, environmentally friendly, and durable self-powered energy-harvesting applications.

ИП Урсолов Владлен Сергеевич

ИНН 500118482352 · ОГРНИП 314500117700049

Реквизиты и контакты