Focused electron beam induced etching of silicon using chlorine.

A new beam-assisted process for removing silicon from a surface in the nanometer scale in a conventional scanning electron microscope is presented. This approach is based on focused electron beam induced etching with pure chlorine gas being used as the precursor. In contrast to the established etching process using a focused ion beam (with or without the addition of a precursor), no amorphization and gallium implanting of the substrate takes place. The observed low etch rates facilitate removal with sub-nanometer precision. No spontaneous etching of silicon as in the case of xenon difluoride was observed. Etch rates of up to 4 nm min( - 1) could be achieved as well as a minimum feature size of below 80 nm. The effect of etching parameters like electron beam energy, electron beam accelerating voltage or pixel spacing were systematically examined. Finally, the underlying etching mechanism in terms of secondary electron interactions and precursor replenishment is discussed.