CO2 capture performance and characterization of cellulose aerogels synthesized from old corrugated containers.

Old corrugated containers with low recyclability were used as raw materials to synthesize a series of aerogels with varying cellulose concentrations in NaOH/urea solution via a freeze-drying process. The resulting aerogels had a rich porous structure with specific surface areas in the range of 132.72-245.19 m2.g-1 and mesopore volumes in the range of 0.73-1.53 cm3.g-1, and were tested for CO2 sorption at ambient temperature and pressure, displaying excellent CO2 adsorption capacities in the range of 1.96-11.78 mmol.g-1. Furthermore, the CO2/N2 selectivity of aerogels decreased with decreasing specific surface area, which was mainly caused by the decrease in CO2 capture. In addition, the CO2 sorption capacity of the sample with 2% cellulose content, CA-2, exceeded the values reported so far for many other sorbents with higher specific surface areas, and showed reasonable cyclic stability for CO2 capture. Therefore, this adsorbent represents an attractive prospect for CO2 uptake at room temperature.