MedElevator Войти в исследования
← Поиск публикаций

DOI 10.1016/j.jhazmat.2018.01.021

Медицинская библиотека · Journal of hazardous materials · 2018

Volatile organic compounds (VOCs) removal in non-thermal plasma double dielectric barrier discharge reactor.

Mustafa Muhammad Farooq, Fu Xindi, Liu Yanjun, Abbas Yawar, Wang Hongtao, Lu Wenjing

СтатьяПоддержка исследования: вне правительства СШАПеревод в очереди

Аннотация

Non-thermal plasma (NTP) an emerging technology to treat volatile organic compounds (VOCs) present in unhygienic point source air streams. In present study, double dielectric barrier discharge (DDBD) reactors were used for the first time to evaluate the removal efficiency of VOCs mixture of different nature at constant experimental conditions (input power 16-65.8 W, VOCs mixture feeding rate 1-6 L/min, 100-101 ppm inlet concentration of individual VOC). Reactor A and B with discharge gap at 6 mm and 3 mm respectively, were used in current study. When treated at an input power of 53.7 W with gas feeding rate of 1 L/min in DDBD reactor A, removal efficiency of the VOCs were: tetrachloroethylene (100%), toluene (100%), trichloroethylene (100%), benzene (100%), ethyl acetate (100%) and carbon disulfide (88.30%); whereas in reactor B, the removal efficiency of all VOCs were 100%. Plasma-catalyst (Pt-Sn/Al2O3, BaTiO3 and HZSM-5) synergistic effect on VOCs removal efficiency was also investigated. Highest removal efficiency i.e 100% was observed for each compound with BaTiO3 and HZSM-5 at an input power 65.8 W. However, integrating NTP with BaTiO3 and HZSM-5 leads to enhanced removal performance of VOCs mixture with high activity, increase in energy efficiency and suppression of unwanted byproducts.

Для цитирования: Mustafa Muhammad Farooq, Fu Xindi, Liu Yanjun, Abbas Yawar, Wang Hongtao, Lu Wenjing. Volatile organic compounds (VOCs) removal in non-thermal plasma double dielectric barrier discharge reactor.. Journal of hazardous materials. 2018. DOI: 10.1016/j.jhazmat.2018.01.021.
Подготовка и перевод публикации
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…

История · было → стало

Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.

Тип публикации указан по данным источника. Уровень доказательности автоматически не присваивается.