MedElevator Войти в исследования
← Поиск публикаций

DOI 10.3390/ma17143539

Медицинская библиотека · Materials (Basel, Switzerland) · 2024

Compound Castings for the Coke Industry.

Wróbel Tomasz

СтатьяПеревод в очереди

Аннотация

In this paper, issues related to the technology of compound castings composed of two parts, i.e., the working layer and the supporting part, made of X46Cr13 high-chromium steel and EN-GJL-HB 255 grey cast iron, respectively, in a liquid-solid system by pre-installing a monolithic insert in the mould cavity are presented. As a part of the research, the mechanism of formation of transitional zones in the bonding area of the above-mentioned two alloys was identified and described. It was shown that the phenomenon that determines the formation of a permanent bond between the joined materials is the transport of C and heat from the "high-carbon and hot" material of the supporting part poured into the mould in the form of liquid cast iron to the "low-carbon and cold" material of the working layer placed in the form of a steel monolithic insert inside the mould cavity. In the paper, the suitability of the compound castings technology developed for use in the coke industry is also presented. Full-size high-chromium steel-grey cast iron compound casting plates designed for the coke quenching car lining were positively verified in real coke plant operating conditions.

Для цитирования: Wróbel Tomasz. Compound Castings for the Coke Industry.. Materials (Basel, Switzerland). 2024. DOI: 10.3390/ma17143539.
Подготовка и перевод публикации
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…

История · было → стало

Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.

Тип публикации указан по данным источника. Уровень доказательности автоматически не присваивается.