DOI 10.1007/s11356-026-37695-y
Electrochemically synthesized graphene@ZnO@MnO2 composite as an advanced adsorbent for levofloxacin removal.
Аннотация
Levofloxacin (LEV), a third-generation fluoroquinolone antibiotic, is increasingly detected in aquatic environments due to its widespread use and incomplete removal in conventional wastewater treatment systems. In this study, a ternary composite based on electrochemically exfoliated graphene (EG) decorated with ZnO and MnO2 nanoparticles (EG@ZnO@MnO2) was fabricated and evaluated for LEV adsorption from aqueous solutions. The material was characterized by SEM, EDS, XRD, FTIR, BET, zeta potential analysis, and Raman analyses. Batch adsorption experiments were conducted to examine the effects of pH, contact time, and initial LEV concentration. The highest removal occurred at pH 7, where zwitterionic LEV likely interacted with the surface through cooperative electrostatic association and noncovalent interactions, with a plausible contribution from π-π interactions on graphene domains and hydrogen bonding with oxygenated surface groups. The zeta potential became less negative after adsorption (-14.1 to -8.3 mV), indicating partial charge neutralization upon LEV adsorption. Kinetic followed the pseudo-second-order model (R2 = 0.979), and equilibrium was best described by the Langmuir isotherm (R2 = 0.994), with a model-estimated capacity of 132.80 mg g-1 and a maximum experimental uptake of 109.50 mg g-1 (90.01% removal). Thermodynamic analysis indicated an exothermic process (ΔHo < 0). The composite retained 78.31% of its initial removal efficiency after five regeneration cycles, and Zn/Mn were not detected in adsorption supernatants while only trace levels appeared in dilute-acid regeneration eluates. Overall, EG@ZnO@MnO2 is a reusable adsorbent for LEV removal in synthetic single-solute systems, and further validation in real wastewater matrices is warranted.
Предметные рубрики MeSH
Подготовка и перевод публикации
Обработка статьи · этапы, ошибки и управление
Ошибки и ограничения
История · было → стало
Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.
Тип публикации указан по данным источника. Уровень доказательности автоматически не присваивается.