Catalytic recovery of metals from end-of-life polycrystalline silicon photovoltaic cells: Experimental insights into silver recovery.

A steady increase in end-of-life (EoL) polycrystalline silicon photovoltaic (c-Si PV) panels is necessitating the development of recycling technologies to guarantee sustainable environmental management and a circular economy. Herein, we propose a comprehensive EoL c-Si PV recycling strategy with an emphasis on selective silver (Ag) recovery. Primarily, a combination of physical and thermal treatment led to the isolation of PV cell fraction from the EoL PV module. Thereafter, a less-toxic, sulphuric acid-hydrogen peroxide (1 M H2SO4- H2O2 1% (v/v %)) lixiviant was used for Ag leaching at 70 °C. A novel catalytic process using platinum-embedded activated carbon (Pt/AC) was used with only hydrogen gas and air to recover selectively and concentrate the Ag+ from the synthetic PV cells leachate. Finally, pure metallic silver (Ag > 99.0 %) was obtained by the conventional electrowinning process. This study also proposes an explicit recovery process for Al, Cu, and Si. In addition, the Pt/AC catalytic process could efficiently recover Cu from the PV cells, similar to Ag. Following the complete recovery of Ag and Cu through Pt/AC, there is sufficient scope to isolate other metals like Al and Pb leaving behind crude Si wafers. Hence, the as-proposed recycling and metal recovery process is a newer approach benefiting industrial implementation.