MedElevator Войти в исследования
← Поиск публикаций

DOI 10.1002/jssc.201201121

Медицинская библиотека · Journal of separation science · 2013

Carbonaceous sorbents for high-temperature interactive liquid chromatography of polyolefins.

Chitta Rajesh, Macko Tibor, Brüll Robert, Miller Matthew, Cong Rongjuan, deGroot Willem

СтатьяПеревод в очереди

Аннотация

The elution behavior of polyethylene (PE) and the three stereoisomers of polypropylene (PP) was studied on porous graphite along with three other carbon-based sorbents, carbon-clad zirconia particles, activated carbon, and exfoliated graphite in a systematic way in this work. Decahydronaphthalene, 1,2,3,4-tetrahydronaphthalene, 1,3,5-trimethylbenzene, tetrachloroethylene, xylene and p-xylene were used as mobile phases. While PE is adsorbed to various extents on all the tested carbonaceous sorbents from the majority of the solvents, PP is fully adsorbed only in selected cases. Testing alcohols (C7-C9) as mobile phase with Hypercarb™ indicates that all stereoisomers of PP are selectively adsorbed and desorbed when a solvent gradient alcohol→1,2,4-trichlorobenzene is used at 160°C. The retention of all stereoisomers of PP increases with the polarity of the alcohol. Linear PE is retained on Hypercarb™ even from 1,2-dichloro- and 1,2,4-trichlorobenzene, when a temperature below 120°C is applied, while it is not retained from these solvents at higher temperatures. All stereoisomeric forms of PP are not adsorbed under the same conditions. Some of the tested new sorbent/solvent systems have potential to be applied in routine analysis of industrially synthesised polyolefins.

Для цитирования: Chitta Rajesh, Macko Tibor, Brüll Robert, Miller Matthew, Cong Rongjuan, deGroot Willem. Carbonaceous sorbents for high-temperature interactive liquid chromatography of polyolefins.. Journal of separation science. 2013. DOI: 10.1002/jssc.201201121.
Подготовка и перевод публикации
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…

История · было → стало

Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.

Тип публикации указан по данным источника. Уровень доказательности автоматически не присваивается.