Hydrodeoxygenation of Isoeugenol-Derived Model Compound over Carbon-Supported Pt and Pt-SnS Catalysts for the Production of Sustainable Jet Fuel.

This study focuses on the sustainable production of bio-jet fuel through the catalytic hydrodeoxygenation (HDO) of isoeugenol (IE). Sucrose-based activated carbon supported bimetallic Platinum-Tin metal sulphides (PtO-SnS/AC) catalyst was prepared for HDO process. Physicochemical properties of catalysts with different spraying synthesis methods (in situ and ex situ metal doping) and Pt loading (0.1-1.0 %) were further investigated. The PtO-SnS/AC catalysts were characterised using various techniques such as X-ray absorption spectroscopy (XAS), X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), high-resolution transmission electron microscopy (HRTEM), field-emission scanning electron microscopy (FESEM) and thermogravimetric analysis (TGA). Both HRTEM and FESEM results show the successful preparation of a spherical nanoparticles doped over activated carbon, and Pt was dispersed on the outer shell of the particles. The catalytic HDO of IE was evaluated in a batch system and showed a high yield and conversion as follows: IE conversion of 100 %, liquid-phase mass balance of 95.92 %, dihydroeugenol (DH) conversion of 99.32 %, propylcyclohexane (PCH) yield of 88.94 % and 2-methoxy-4-propylcyclohexanol (HYD) yield of 76.19 %. Moreover, the PtO-SnS/AC catalyst exhibited high reusability with low metal leaching and high coke resistance for 10 cycles. The catalyst was evaluated in a continuous flow reactor for 100 h at different reaction temperatures, and interestingly, the catalyst showed low deactivation with a high half-time.