Biochemical responses and phytoremediation potential of Azolla imbricata (Roxb.) Nakai in water and nutrient media exposed to waste metal cutting fluid along with temperature and humidity stress.

Phytoremediation of metals from water (WM) and nutrient (NM) media exposed to waste metal cutting fluid (WMCF) along with temperature (T) and humidity (H) stress was tested using Azolla imbricata (Roxb.) Nakai. In the absence of WMCF, biomass was higher in NM than in WM during all tests. Surprisingly, opposite results were noted in the presence of WMCF, with growth failing at exposure to > 0.1% and > 0.5% in NM and WM, respectively. Further, correlation analysis of the growth data following WM exposure revealed that biomass was affected positively by T and negatively by H and metal accumulation. Simultaneously, metal accumulation was affected negatively by T and positively by H. The average accumulations of Al, Cd, Cr, Fe, Pb, and Zn across all T/H tests were 540, 282, 71, 1645, 2494 and 1110 mg·kg-1, respectively. The observed bioconcentration factor indicated that A. imbricata acts as a hyperaccumulator or accumulator of Zn (>10) and as either accumulator (>1) or excluder (<1) of the other metals. Overall, the phytoremediation performance of A. imbricata in multi-metal-contaminated WMCF was high in WM under all environmental conditions. Therefore, the use of WM is an economically feasible approach for the removal of metals from WMCF.