Dispersive liquid-liquid microextraction followed by green high-performance liquid chromatography for fluconazole determination in cerebrospinal fluid with the aid of chemometric tools.

A new method, simple and fast, for fluconazole (FLU) quantification in cerebrospinal fluid (CSF) samples using dispersive liquid-liquid microextraction (DLLME) and an eco-friendly mobile phase for HPLC-PDA was developed. The study of DLLME extraction condition covered the investigation of 12 combinations of extraction and disperser solvents followed by a fractional factorial design 2(7-3) to determine the influence of seven factors. After this stage, a central composite design was performed for three factors and a response surface was obtained. Aiming a compromise between a good recovery and a low organic solvent use it was established an extraction condition that consists of: 100 μL of chloroform, 100 μL of isopropyl alcohol, 200 μL of CSF, 200 μL of 50 mM phosphate buffer pH 7.3 and centrifugation for 5 min at 2200g and 4 °C. The HPLC analysis used an Ascentis® Express C18 column (100 mm × 4.6 mm, 2.7 μm) and an Ascentis® Express C18 guard column (3 mm × 4.6 mm, 2.7 μm), ethanol : water (15 : 85, v/v) as mobile phase, temperature of 45 °C, flow rate of 0.8 mL min-1 and phenacetin as internal standard. The method validation was performed according to European Agency's Guideline on Bioanalytical Validation Methodology and a linear range was obtained from 0.25 to 62.5 μg mL-1, with precision and accuracy within the recommended limits and recovery of 70% for FLU and 81% for phenacetin. Samples were stable in the studies performed and the method showed to be selective and with no carryover effect. The feasibility of the obtained method was confirmed by FLU determination at a CSF from a patient who was treated for neuromycosis. Therefore, here is described a method that meets many principles of green analytical chemistry and is useful for FLU therapeutic monitoring.