Degradation of trichloroethylene in aqueous solution by nanoscale calcium peroxide in the Fe(II)-based catalytic environments.

In this study, nCaO2 was synthesized successfully and applied in the Fe(II)-based catalytic environments in investigating trichloroethylene (TCE) removal performance. nCaO2 with the particle sizes in the range of 50-200 nm was prepared, and it performed better for TCE removal when compared to the conventional CaO2. Further experimental results showed that 70.4% of TCE could be removed in 180 min at the nCaO2/Fe(II)/TCE molar ratio of 1/2/1, while this data was elevated to 86.1% in the presence of citric acid (CA) at the nCaO2/Fe(II)/CA/TCE molar ratio of 1/2/2/1 in the same test period. Probe compound tests, specifically designed for free radicals confirmation, demonstrated the presence of HO• and O2 -•. Moreover, scavenging tests indicated that HO• was the major radical responsible for TCE degradation but O2 -• promoted the removal of TCE in both nCaO2/Fe(II) and nCaO2/Fe(II)-CA system. In addition, the effects of initial solution pH and anions (Cl-, HCO3 -) were also evaluated. The performance of TCE degradation in actual groundwater demonstrated that both nCaO2/Fe(II) and nCaO2/Fe(II)-CA systems can be applicable for TCE removal in ISCO practice and the nCaO2/Fe(II)-CA system is much promising technique. These fundamental data strongly confirmed the feasibility and potential of nCaO2 based technique in the remediation of TCE contaminated groundwater.