MedElevator Войти в исследования
← Поиск публикаций

DOI 10.3390/ma16052008

Медицинская библиотека · Materials (Basel, Switzerland) · 2023

Process Optimization of Dual-Liquid Casting and Interfacial Strength-Toughness of the Produced LAS/HCCI Bimetal.

Xing Zhen-Guo, He Li-Xin, Liang Shun-Xing, Chang Lian-Bo, Xiao Zhi-Xia, Xing Wan-Li, Shen Hai-Bin, Cao Jing-Jing, Liu Hong-Ji

СтатьяПеревод в очереди

Аннотация

The pouring time interval is the decisive factor of dual-liquid casting for bimetallic productions. Traditionally, the pouring time interval is fully determined by the operator's experience and on-site observation. Thus, the quality of bimetallic castings is unstable. In this work, the pouring time interval of dual-liquid casting for producing low alloy steel/high chromium cast iron (LAS/HCCI) bimetallic hammerheads is optimized via theoretical simulation and experimental verification. The relevancies of interfacial width and bonding strength to pouring time interval are, respectively, established. The results of bonding stress and interfacial microstructure indicate that 40 s is the optimum pouring time interval. The effects of interfacial protective agent on interfacial strength-toughness are also investigated. The addition of the interfacial protective agent yields an increase of 41.5% in interfacial bonding strength and 15.6% in toughness. The optimum dual-liquid casting process is used to produce LAS/HCCI bimetallic hammerheads. Samples cut from these hammerheads show excellent strength-toughness (1188 Mpa for bonding strength and 17 J/cm2 for toughness). The findings could be a reference for dual-liquid casting technology. They are also helpful for understanding the formation theory of the bimetal interface.

Для цитирования: Xing Zhen-Guo, He Li-Xin, Liang Shun-Xing, Chang Lian-Bo, Xiao Zhi-Xia, Xing Wan-Li, Shen Hai-Bin, Cao Jing-Jing, Liu Hong-Ji. Process Optimization of Dual-Liquid Casting and Interfacial Strength-Toughness of the Produced LAS/HCCI Bimetal.. Materials (Basel, Switzerland). 2023. DOI: 10.3390/ma16052008.
Подготовка и перевод публикации
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…

История · было → стало

Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.

Тип публикации указан по данным источника. Уровень доказательности автоматически не присваивается.