MedElevator Войти в исследования
← Поиск публикаций

DOI 10.3390/s22166273

Медицинская библиотека · Sensors (Basel, Switzerland) · 2022

ZnO Nanorods Coated Single-Mode-Multimode-Single-Mode Optical Fiber Sensor for VOC Biomarker Detection.

Swargiary Kankan, Metem Prattakorn, Kulatumyotin Chayapol, Thaneerat Suphavit, Ajchareeyasoontorn Noppasin, Jitpratak Pannathorn, Bora Tanujjal, Mohammed Waleed S, Dutta Joydeep, Viphavakit Charusluk

СтатьяПеревод в очереди

Аннотация

This work demonstrated a ZnO-coated optical fiber sensor for the detection of a volatile organic compound (VOC) biomarker for diabetes for detecting isopropanol (IPA) markers. A coreless silica fiber (CSF) was connected to a single-mode fiber (SMF) at both ends to achieve a SMF-CSF-SMF structure. CSF is the sensing region where multimode interference (MMI) generates higher light interaction at the interface between the fiber and sensing medium, leading to enhanced sensitivity. Optimization of the CSF length was conducted numerically to attain the highest possible coupling efficiency at the output. Surface functionalization was achieved via hydrothermal growth of ZnO nanorods directly onto the CSF at low temperatures. The optical fiber-based sensor was successfully fabricated and tested with 20%, 40%, 60%, 80%, and 100% of IPA. The sensor response was recorded using an optical spectrometer and analyzed for sensor sensitivity. The fabricated sensor shows the potential to detect isopropanol with the sensitivity of 0.053 nm/%IPA vapor. Further improvement of the sensor sensitivity and selectivity is also proposed for future work.

Для цитирования: Swargiary Kankan, Metem Prattakorn, Kulatumyotin Chayapol, Thaneerat Suphavit, Ajchareeyasoontorn Noppasin, Jitpratak Pannathorn, Bora Tanujjal, Mohammed Waleed S, Dutta Joydeep, Viphavakit Charusluk. ZnO Nanorods Coated Single-Mode-Multimode-Single-Mode Optical Fiber Sensor for VOC Biomarker Detection.. Sensors (Basel, Switzerland). 2022. DOI: 10.3390/s22166273.

Предметные рубрики MeSH

Подготовка и перевод публикации
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…

История · было → стало

Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.

Тип публикации указан по данным источника. Уровень доказательности автоматически не присваивается.