MedElevator Войти в исследования
← Поиск публикаций

DOI 10.1021/es1002428

Медицинская библиотека · Environmental science & technology · 2010

Bioaugmentation for treatment of dense non-aqueous phase liquid in fractured sandstone blocks.

Schaefer Charles E, Towne Rachael M, Vainberg Simon, McCray John E, Steffan Robert J

СтатьяПоддержка исследования: вне правительства СШАПеревод в очереди

Аннотация

Laboratory experiments were performed in discretely fractured sandstone blocks to evaluate the use of bioaugmentation to treat residual dense non-aqueous phase liquid (DNAPL) tetrachloroethene (PCE). Significant dechlorination of PCE and growth of Dehalococcoides spp. (DHC) occurred within the fractures. DNAPL dissolution was enhanced during bioaugmentation by up to a factor of approximately 3.5, with dissolved PCE concentrations at or near aqueous solubility. The extent of dechlorination and DNAPL dissolution enhancement were dependent upon the fracture characteristics, residence time in the fractures, and dissolved concentration of PCE. No relationship was observed between planktonic DHC concentrations exiting the fracture and the observed extents of PCE dechlorination and DNAPL dissolution. Measured planktonic DHC concentrations exiting the fracture increased with increasing flow rate and bioaugmentation dosage, suggesting that these parameters may be important for distribution of DHC to treat dissolved chlorinated ethenes migrating downgradient of the DNAPL source. Bioaugmentation dosage, for the DHC dosages and conditions studied, did not have a measurable impact on DNAPL dissolution or dechlorination within the fractures themselves. Overall, these results indicate that bioaugmentation may be a viable remedial option for treating DNAPL sources in bedrock.

Для цитирования: Schaefer Charles E, Towne Rachael M, Vainberg Simon, McCray John E, Steffan Robert J. Bioaugmentation for treatment of dense non-aqueous phase liquid in fractured sandstone blocks.. Environmental science & technology. 2010. DOI: 10.1021/es1002428.

Предметные рубрики MeSH

Подготовка и перевод публикации
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…

История · было → стало

Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.

Тип публикации указан по данным источника. Уровень доказательности автоматически не присваивается.