Computed tomography analysis of the relationship between the coronoid and the radial head.

BACKGROUND

The coronoid process is an important stabilizer of the elbow, and its anatomy has been extensively studied. However, data documenting the relationship of the coronoid relative to the radial head (RH) are limited. The latter is a good landmark for the surgeon when débriding or reconstructing the coronoid. This imaging-based study quantified the anatomic relationship between the coronoid and the proximal radius and ulna.

METHODS

We investigated 80 cadaveric upper extremities (18 paired elbows) by 3-dimensional digital analysis of computed tomography data. After construction of a standardized coordinate system, the relationships between the coronoid, the anterior-most point of the RH, the deepest point of the articular surface of the RH, the top of the lesser sigmoid notch, and the deepest point of the guiding ridge of the trochlear notch were analyzed.

RESULTS

The mean height of the tip of the coronoid was 36 ± 4 mm (range, 26-43 mm). The mean height of the anterior-most point of the RH was 40 ± 4 mm (range, 28-47 mm). The mean distance between the tip of the coronoid and the anterior-most point of the RH was 4.5 ± 1 mm (range, 2-10 mm). For paired elbows, the heights of the tip of the coronoid and the anterior-most point of the RH were similar between sides.

CONCLUSION

This study described the relationship between the coronoid and RH. This information should prove useful when reconstructing a coronoid from a medial approach in the case of an intact RH. The difference in radiographic height between the tip of the coronoid and anterior RH in the normal elbow averages 5 mm. However, when we account for the normal cartilage thickness of the RH and coronoid, a 3- to 6-mm difference in height would be seen at surgery depending on whether the cartilage of the coronoid process is intact or removed. The distance between the tip of the coronoid and the anterior-most point of the RH is similar to the size of shavers used when débriding osteophytes during arthroscopy.